Tables

Back to Products

Classic Series
Specifications

•  Solid red oak table frame consisting of 2.25” square legs
   with PVC leg protecting boots (mechanically fastened),
   double hanger bolt corner design with 12 gauge steel
   corner bracket, each leg attached with (2) nylock nuts
   with flange
•  Aprons are 13/16” x 4” solid red oak
•   Clear wood finish is an industrial UV cured lacquer that is
   chemical resistant
•  Glides are 1.5” diameter nickel plated steel adjustable to
   1.5” for floor leveling purposes
•  Tops mounted to wood frame with mechanical and
   proprietary adhesive fastening at our factory
•   ADA compliance option relieves 2” from the front apron
   (no upcharge)
•  SEFA tested to 3000# (SEFA 8 Tests for tables)
•  15 Year Warranty, bar code product ID on every table ties
   into our computer system
•  Ships KDF (knocked down flat) on narrow pallets for
   efficient handling minimizing freight damage,
   straightforward assembly by installers at the job site

Options

  • Tops : Solid epoxy resin 3/4” or 1” Solid phenolic resin by Trespa® 3/4” or 1” Eco-resin© solid phenolic 3/4”

 

Steel Series
Specifications
• 11 gauge 1.5” square A500 steel tubing legs, 14 gauge
  1”x2” A500 steel tubing aprons with fillet welded cross
  brace.
• Each table consists of 3 parts, fillet welded H-Frame top
  assembly and fillet welded leg assemblies which slide into
  the top frame and are fastened by (8) 3/8” x ¾” Type F
  hex bolts, four per side through specially designed 7 gauge
  threaded A500 fillet welded assembly flanges yielding a
  fully unitized table frame once assembled.
• Electro statically applied epoxy powder coated steel frame
  in black, textured for scratch resistance.
• Tops mounted to steel frame with mechanical and
  proprietary adhesive fastening at our factory
• 3/8” x 16 threaded inserts with 1.5” steel glides,
  adjustable to 1.5” for floor leveling purposes.
•  ADA compliant knee clearance on 30” table height.
•  15 Year Warranty, bar code product ID on every table ties
    into our computer system
•  Ships KDF (knocked down flat) on narrow pallets for

    efficient handling minimizing freight damage,
    straightforward assembly by Pepco certified installers at
    the job site.

Options
•  Tops : Solid epoxy resin 3/4” or 1” Solid phenolic resin by
   Trespa® 3/4” or 1” Eco-resin© solid phenolic 3/4”
•  Adjustable height option (29”-41”) in 1” increments
   with stainless steel leg inserts.
•  Casters (Swivel, Double locking)
•  GFCI Protected Electrical Outlets (1-4)
•  Greenlaw overhead rod assembly